titanium body jewelry accessories

You 've got the balls or other accessories and you need just the shaft ?
Here you go !...these are titanium shafts coming in 1.2mm and 1.6mm guage 16 and 14 Guage US, and as usual in a variety of lengths to suit the job !
Of course, if you do not see the size you need, just e-mail us and we can make it for you.

Important Note :
The bent shafts proposed here might not be suitable if you intend to fit a Side Threaded jewelled ball for navel as it might not lock in the correct position for the jewel to face forward. You might be lucky that it fits, but it is a gamble as bananabells are normally made in the workshop and locked in the right direction to allow the jewel to face the right way..
If you intend to fit balls with a jewel on the top and not on the side then they are perfect for this purpose, but can also be used for plain balls and all accessories which do not require a direction.

Although this type of bar is coming in 1.6mm 14G US gauge and is perfectly safe and adapted to skin piercing, they can be used to link two piercings and give your ear cartilage and lobe piercing a stunning look !

This bar will come fitted with 2 x 5mm balls

So if you have already threaded accessories at 1.6mm, you can use them with this bar.

Tip : looking great with spikes, asteroids, UFO or other accessories found on this page !

Designed to fit the BioFlex Internal labrets, the disc is a small 2mm and the jewel is as sparkly as ever !

Buy this only if you have already a BioFlex push fit Internal labret..choose the colour you need using the drop down menus, there is a good combination of colours here !




Customer Reviews

  pretty for a change  i like this as it allows me to change my look so simply and quickly. it's a bit more of a defined look than the bioflex jewlled discs   Hannah Rider

Presented in a wide range of colours an sizes titanium cones are widely used for body piercing jewellery. They give a cool look to your piercings, and you will find here the diameters 3mm and 4mm with 1.2mm threads, but also 4mm, 5mm, 6mm, 8mm, 10mm and 12mm with 1.6mm threads !

You can also use our Cones on PTFE and BioFlex bars.

A shocking difference !

View The Colour Chart

Very cool ! The titanium threaded Tri-Ball is going to give a stunning look to your piercing ! As eyebrow piercing jewellery or labret, it can be used also in nipples and ear piercing.

To be used on steel, titanium bars, you can also use it with BioFlex or PTFE shafts.

The 1.2mm threaded is a small 5mm long
The 1.6mm threaded is 8mm long.

Another design of titanium accessory suitable for a whole range of piercings...the Ball Spike will spice up your look !

To be used on steel, titanium bars, you can also use it with BioFlex or PTFE shafts.

The 1.2mm threaded is a small 6mm long
The 1.6mm threaded is average 10mm long.

Cool design of titanium accessory, again suitable for a whole range of piercings...the Uni Ball is a mix between the Ball Spike and the Unicorn Spike...Titanium jewellery at its best !

To be used on steel, titanium bars, you can also use it with BioFlex or PTFE shafts.

The 1.2mm threaded is a small 6mm long
The 1.6mm threaded is average 10mm long.

You have the ring and you need just the ball ? Here you go...these are the Titanium dimpled balls to fit rings available on the market. They are available in a wide range...just get the right size and colour for your ring !

Tips : If you get a slightly bigger ball than the opening of your ring, you will increase the diameter of your ring. If you choose slightly smaller ball than the opening your ring, you will need to exerce a pressure on your ring to close the opening to hold the ball. You will then decrease the diameter of your ring.

You have the ring and you need just the ball ? Here you go...these are the titanium jewelled dimpled balls to fit rings available on the market. They are available in a wide range of colours for the metal and the jewel ..just get the right size for your ring !

Tips : If you get a slightly bigger ball than the opening of your ring, you will increase the diameter of your ring. If you choose slightly smaller ball than the opening your ring, you will need to exerce a pressure on your ring to close the opening to hold the ball. You will then decrease the diameter of your ring.

Available in 3mm,4mm, 5mm , 6mm diametre and 8mm.
Titanium ball can easily be screwed on PTFE Bars, and will fit standard 1.6mm size bars of conventional Jewellery.
3mm Diametre Balls will Fit only 1.2mm Thickness Conventional Body Jewellery and our 1.2mm PTFE Bars.
View The Colour Chart

4mm, 5mm or 6mm Jewell Ball threaded in 1.6mm size -Standard size- coming in different colours and with Swarovski jewels set in Titanium.

Available in a wide range of Colours.
View The Colour Chart

3mm Jewelled Micro Ball coming in different colours and set in Titanium, thanks to new technology !

The thread is 1.2mm size. - thread inside the ball -.

Small, Nice and available in different colours.
View The Colour Chart

You have a bar or a Micro labret 1.6mm guage with the thread inside the bar? You need just another ball ?
Here you go...these are 2.5mm diameter jewelled balls in titanium with the thread Outside the ball. Just choose the colour you want for the titanium and the jewel colour you prefer in the drop down menus..!

Presented in a wide range of colours, and 2 different sizes ; 6mm or 8mm Diametre.

All our titanium jewelled balls are threaded to receive our new BioFlex and PTFE bars.

For metal bars, they will need to be set to face the right way, so e-mail us if you need them onto a metal bar, or altrernatively, visit the other sections.

Generally used to fit on navels and nipple bars, these jewelled balls could accomodate unusual piercings like the Conch, etc...

We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.
View The Jewell Colour Chart

Titanium 1.6mm Side Threaded 4mm or 5mm jewelled ball that can be used with either BioFlex jewellery or PTFE in 1.6mm 14G US thicknesses. Only available in crystal colour for the jewel for now...

The price shown is per ball. We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.

Opening up a whole range of possibilities for a wide variety of piercings where the jewels should face on the side, these side threaded titanium balls where until now the needed body jewellery accessory !

Titanium 1.2mm Side Threaded 4mm jewelled ball that can be used with either BioFlex jewellery or PTFE in 1.2mm thicknesses.

They can be used as well on steel bars or titanium only if you wish to use the jewel on only one side. You will have problems if you wish to put 2 of these jewels balls on a metal bar in the hope they face both the same way as the threads will not lock the same way.

Opening up a whole range of possibilities for a wide variety of piercings where the jewels should face on the side, these side threaded titanium balls are little miracles of technology !

The price shown is per ball. We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.

New !! These Titanium 1.2mm Side Threaded jewelled balls can be used with either BioFlex jewellery or PTFE in 1.2mm thicknesses 16G US. They are available only in crystal colour for the jewel for know...

Opening up a whole range of possibilities for a wide variety of piercings where the jewels should face on the side, these side threaded titanium balls are little miracles of technology ! As small as 3mm !! We just hope it's not going to be too fiddly for you, but the end results are stunning for eyebrows, ear piercings, etc... the 5mm size is useful for ear or nipple piercing, when you have a small guage piercing and you want to show bigger jewels than the 3mm or 4mm usually available on the body jewelry market for 1.2mm guage.

The price shown is per ball. We have specially discounted a set of 3 bars of the material of your choice, BioFlex or PTFE as an option to this product.

Specifically designed for surface piercing and exclusive to body-piercing-jewellery.com, this 3/4 Ball is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges and even nipples !

Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing...

Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit!

View the Colour Chart

Specifically designed for surface piercing and exclusive to body-piercing-jewellery.com, this 1/2 Ball is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges, nipples and why not navels !!

Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing... and with Titanium, you avoid allergies..!

Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit!

Specifically designed for surface piercing and exclusive to body-piercing-jewellery.com, this threaded Disc is to be used with PTFE but can be used also for some piercings like eyebrows for the top, or bottom or both balls ear cartillage piercings, bridges, nipples, labrets and why not navels !!

Surface piercings requires specific designs to give the piercings the best chances to heal properly..you can now reduce the pressure applied onto your surface piercing...

Thread sizes are 1.2mm or 1.6mm. You can buy PTFE in Packets of Three bars in the PTFE Section...Sky's the limit!

Another exclusive to body-piercing-jewellery.com, this threaded Square Ball can be used with PTFE or other metal threaded bars. Looks different on Labrets or Navels for those who are looking for something different !

Thread size is 1.6mm. There are 5 flat faces one on the top.

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Colour Chart

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Jewell Colour Chart

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Colour Chart

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Jewell Colour Chart

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Colour Chart

A safer and threaded accessory to fit any 1.6mm bars ...And available in a wide combination of Colours.
View The Jewell Colour Chart

A packet of three PTFE bars. Perfect if you already have jewellery that you would like to convert to PTFE .... and what if you adjust a bar and it is too short? .... a spare bar when you most need it .... Choose the thickness you want..... you will receive three bars of that thickness, all at least 28mm long - ample for all your needs.

A packet of three PTFE bars. Perfect if you already have jewellery that you would like to convert to PTFE ...and adapted if you need that extra length that you cannot get anywhere else... Choose the thickness you want..... you will receive three bars of that thickness, or one bar of each size 1.2mm, 1.6mm or 2.4mm all at least 50mm long !

A packet of three PTFE bars. Perfect if you already have jewellery that you would like to convert to PTFE .... but also usefull if you need a very long bar or cut-it to different lengths to obtain several custom sizes..
Choose the thickness you want..... you will receive three bars of that thickness, or one bar of each size 1.2mm, 1.6mm or 2.4mm all at least 100mm long !